TL;DR — Tumble Dryer Installation At A Glance
- Most tumble dryer installations cost £40–£90 inc VAT, rising to £60–£110 in London and the South East.
- Condenser and heat-pump dryers are the simplest to fit — they mainly need a socket and a level spot.
- Vented dryers cost more if a new wall vent or ducting has to be fitted to carry moisture outside.
- Prices depend on the dryer type, whether venting is needed, access, and any old-appliance removal.
- A standard fit takes 20–45 minutes where a socket is in place and no venting work is required.
- The best value is to choose a condenser or heat-pump model, or book the fit alongside another appliance.
Get a fixed price for tumble dryer installation — check prices and book online or arrange a vetted, insured engineer to fit and test your dryer.
How Much Does Tumble Dryer Installation Cost In 2026?
Installing a tumble dryer in the UK costs £40–£90 inc VAT, and £60–£110 in London and the South East. The fit covers positioning the dryer, levelling it, connecting it to power and — for a vented model — arranging how the warm, moist air is carried outside. Many quotes also include disconnecting and taking away the old appliance.
The dryer type is the main thing that decides the price. Condenser and heat-pump dryers collect moisture in an internal tank (or drain it away), so they simply need a socket and a level position — the quickest, cheapest kind of fit. A vented dryer, by contrast, has to expel moist air, either through a hose to an open window or, better, through a permanent vent in an external wall. Fitting or connecting that vent is what pushes a vented installation towards the top of the range.
A standard fit where a socket is already in place takes 20–45 minutes. Adding a wall vent, drilling through masonry and fitting an external grille takes longer and adds materials. Some dryers can also be stacked on top of a washing machine with a bracket kit, which is another common variation. Here is what installation costs across the UK:
| Type of installation | Rest of UK | London & South East |
|---|---|---|
| Condenser / heat-pump fit (socket in place) | £40–£70 | £60–£90 |
| Vented fit using existing vent or hose | £45–£80 | £65–£100 |
| Vented fit with new wall vent / ducting | £80–£150+ | £100–£200+ |
| Fit including old-dryer removal | £55–£90 | £75–£110 |
Figures include VAT and reflect 2026 market rates. Your exact price depends on the dryer type, venting and your postcode — get a fixed quote here.
Tumble Dryer Installation Cost By Type
What you pay depends mostly on the dryer type and whether venting work is needed. These are typical prices for the common scenarios:
| Job | Typical price (rest of UK) | Typical price (London) |
|---|---|---|
| Fit a condenser or heat-pump dryer | £40–£70 | £60–£90 |
| Fit a vented dryer (existing vent) | £45–£80 | £65–£100 |
| Fit a new external wall vent and grille | £60–£150 | £80–£200 |
| Stack a dryer on a washer (bracket kit) | £40–£80 | £55–£110 |
| Remove and recycle old dryer | £15–£40 | £20–£50 |
| Plumb a condenser dryer to a drain | £60–£120 | £80–£160 |
If your current dryer has stopped heating or turning, a tumble dryer repair may be cheaper than replacing — see that guide before paying to install a new one.
What Affects The Cost Of Tumble Dryer Installation?
Several factors decide where you land in the ranges above.
1. The Dryer Type
This is the main driver. Condenser and heat-pump models need only a socket and a level spot. Vented models need somewhere for the moist air to go, and if that means a new wall vent, the cost rises.
2. Venting Work
Using an existing vent or a hose to a window is cheap. Drilling through an external wall, fitting ducting and an outside grille adds labour and materials, especially through thick masonry.
3. Old-Appliance Removal And Disposal
Disconnecting the old dryer may be included, but recycling it responsibly can be a small extra of £15–£40, as it is electrical waste.
4. Your Location
London and the South East run roughly 15–30% higher than the North of England, Wales and Scotland, reflecting higher labour costs. A £50 fit elsewhere can be £70–£90 in the capital.
5. Position And Access
Stacking a dryer on a washer, fitting it into a tight cupboard, or an upstairs or garage location can add time compared with a simple floor-standing spot next to a socket.
6. Timing And Bundling
Standard weekday slots are cheaper than evenings, weekends or same-day visits. Booking the fit with delivery or alongside another appliance spreads the call-out.
What's Included — And What's Not
| Typically included in an installation | Usually charged separately |
|---|---|
| Unpacking and positioning the dryer | Recycling or disposing of the old appliance |
| Levelling it and connecting to an existing socket | Fitting a new external wall vent, ducting and grille |
| Connecting to an existing vent or fitting the supplied hose | A stacking bracket kit for mounting on a washing machine |
| A brief test run to check it heats and turns | Plumbing a condenser dryer to a drain, where supported |
| Disconnecting the old dryer (removal of it may be extra) | Adding or extending an electrical socket (a job for an electrician) |
| Out-of-hours, weekend or same-day premiums |
Always confirm in writing whether venting work and old-appliance removal are included, so the quote matches the job.
Can You Do It Yourself?
A condenser or heat-pump dryer is about as easy as appliances get: position it, level the feet, plug it in, and run a short cycle. For these models, DIY is realistic and there is little that can go wrong, which saves the fitting fee.
A vented dryer is where a professional earns their fee. Running a hose to a permanently open window works but lets heat and moisture back into the room; a proper external vent needs a hole drilled through the wall, ducting fitted and an outside grille sealed — a job that benefits from the right tools and experience, especially in masonry. Correct venting also matters for safety and to prevent damp and mould from moisture building up indoors. Any new socket, or plumbing a condenser to a drain, should go to the relevant trade. For a straightforward condenser fit, DIY is fine; for venting work, a professional gives a tidy, safe result.
How To Save Money On Tumble Dryer Installation
- Choose a condenser or heat-pump dryer for the simplest, cheapest fit — no venting required.
- Use an existing vent where one is already in the wall, avoiding new ducting work.
- Book installation with delivery so the fit and drop-off happen together.
- Bundle appliances — fit a washing machine or dishwasher at the same visit to spread the call-out.
- Handle disposal yourself if your council offers cheap electrical-waste collection.
- Book a standard weekday slot rather than evenings, weekends or same-day.
How To Hire A Good Appliance Installer
Look for an installer who is insured, gives a fixed, written quote, and confirms whether venting work and old-appliance removal are included. Check reviews, ask that they test the dryer before leaving, and for vented models make sure they can fit an external vent neatly if one is needed. Any new socket or drainage work should be carried out by a suitably qualified tradesperson.
With Fantastic Services, you get vetted, insured engineers, transparent pricing and online booking — describe the dryer and space, and get a price before anyone visits.
Get your New Tumble Dryer up and Running without the Fuss.
Frequently Asked Questions
How Much Does It Cost To Install A Tumble Dryer In The UK?
Most tumble dryer installations cost £40–£90 inc VAT in 2026, or £60–£110 in London. Condenser and heat-pump models are cheapest, while a vented dryer needing a new wall vent can run £80–£150+.
Is A Vented Or Condenser Dryer Cheaper To Install?
A condenser or heat-pump dryer is cheaper to install, because it only needs a socket and a level spot. A vented dryer costs more if a new external wall vent and ducting have to be fitted to carry moisture outside.
Does Tumble Dryer Installation Include Removing The Old One?
Disconnecting the old dryer is often included, but recycling or disposing of it may be a small extra of £15–£40, as it counts as electrical waste. Confirm this when booking.
How Long Does It Take To Install A Tumble Dryer?
A condenser or heat-pump fit takes 20–45 minutes where a socket is in place. Fitting a new external vent for a vented model takes longer, often an hour or more, because of the drilling and ducting.
Can A Tumble Dryer Be Stacked On A Washing Machine?
Yes, with a proper stacking bracket kit to hold it securely. Fitting one is a common option where floor space is tight, and typically adds £40–£80 to a standard installation.
Do You Need A Vent For A Tumble Dryer?
Only a vented dryer needs somewhere for moist air to go — an existing wall vent or a hose to a window, or ideally a new external vent. Condenser and heat-pump dryers do not need venting, as they collect or drain the moisture internally.
Sources (market research, 2026): Housekeep, Checkatrade, MyBuilder, MyJobQuote and regional appliance installers. All prices are indicative market ranges and should be verified against Fantastic Services' live pricing before publication.
