TL;DR — Cooker And Hob Repair At A Glance
- Most cooker and hob repairs cost £70–£250 inc VAT, rising to £100–£300 in London and the South East.
- The type of fault is the biggest cost driver — a new element or switch is cheap, a ceramic top or induction board is dearer.
- A diagnostic call-out is £50–£80, and reputable engineers usually waive or discount it if the repair goes ahead.
- Gas hob and cooker work must be done by a Gas Safe registered engineer — never a general handyman.
- Repair-or-replace rule of thumb: if a major part costs more than half a comparable new appliance, replacement is often smarter.
- Book a fixed-price repair and always confirm whether the part is included in the quote.
Get a fixed price for a cooker or hob repair — check prices and book online or arrange a visit from a vetted, insured appliance engineer.
How Much Does Cooker And Hob Repair Cost In 2026?
A cooker or hob repair in the UK costs £70–£250 inc VAT, and £100–£300 in London and the South East. The price splits into labour (the engineer's time, plus the call-out or diagnostic fee) and the part being replaced. Simple electrical faults — a failed ring, a switch or a thermostat — sit at the bottom; ceramic glass tops, induction control boards and gas components sit higher.
The fuel type shapes both the cost and who can legally do the work. Electric cookers and hobs cover most repairs, from a dead element to a cracked ceramic surface. Gas hobs and cookers involve the gas supply, ignition and safety devices, and any repair to them must be carried out by a Gas Safe registered engineer — this is a legal safety requirement, not optional. Induction hobs are electric but use electronic control boards that are pricier to replace than a traditional element.
Most jobs are done in a single visit of one to two hours once the part is to hand. Where a component has to be ordered, a second visit may be needed to fit it. Here is what cooker and hob repairs cost across the UK:
| Type of repair | Rest of UK | London & South East |
|---|---|---|
| Diagnostic / call-out (often waived if repair proceeds) | £50–£80 | £70–£100 |
| Minor fix (switch, knob, thermostat, ignition) | £70–£130 | £100–£170 |
| Moderate repair (element, fan, seal, burner) | £100–£200 | £130–£250 |
| Major repair (ceramic top, induction / control board) | £150–£250+ | £200–£300+ |
Figures include VAT and reflect 2026 market rates. Your exact price depends on the fault, the appliance and your postcode — get a fixed quote here.
Cooker And Hob Repair Cost By Fault And Part
The single biggest variable is which part has failed. Labour is usually £50–£130, with the part added on top. These are typical faults and replacement-part prices:
| Fault / part | What it fixes | Typical part price (inc VAT) |
|---|---|---|
| Control knob or switch | Ring or oven not responding | £10–£40 |
| Ignition / spark unit (gas) | Hob won't light or keeps clicking | £20–£60 |
| Thermostat | Oven over- or under-heating | £20–£60 |
| Heating element (electric oven) | Oven not heating, uneven cooking | £25–£70 |
| Hob element / hotplate | One ring not working | £30–£80 |
| Fan motor (fan oven) | No heat circulation, cold spots | £40–£90 |
| Ceramic / glass hob surface | Cracked or shattered top | £80–£200 |
| Induction control board (PCB) | Error codes, dead zones, no power | £100–£250 |
Gas repairs also carry the cost of a Gas Safe engineer's time, and a repair should always end with a safety check that the appliance burns and shuts off correctly. Emergency or same-day call-outs carry a premium over a standard booked visit.
Repair Or Replace? When It's Worth Fixing
A repair is usually cheaper than a new appliance, but not always the wiser choice. Two questions decide it: how old is the cooker, and how big is the fault?
A useful rule of thumb is the 50% guide: if the repair would cost more than half the price of a comparable new appliance, replacement is often better value. Layer age on top. Most cookers and hobs last 8–12 years. A cheap fix on a fairly new appliance — a switch, element or thermostat — is almost always worth doing. But a cracked ceramic top or a failed induction control board on an older cooker can cost £150–£250, which may be close to the price of a new hob that will run more efficiently.
If the appliance is still under manufacturer or extended warranty, use the warranty route first. And with gas appliances, any doubt over safety — a smell of gas, sooty marks, or a burner that will not shut off — means switching it off and calling a Gas Safe engineer straight away rather than weighing up costs.
What Affects The Cost Of A Cooker Or Hob Repair?
Several factors decide where you land in the ranges above.
1. The Type Of Fault
This is the main driver. A switch, knob or thermostat is a quick, cheap fix. A ceramic top, induction board or gas safety component costs more in both parts and labour.
2. Gas, Electric Or Induction
Gas work needs a Gas Safe engineer and a safety check. Induction hobs use pricier electronic boards. Standard electric elements and switches are the cheapest to put right.
3. Parts And Brand
Genuine manufacturer parts cost more than universal equivalents, and premium or integrated appliances can carry higher part prices and longer fitting times. Older or discontinued models sometimes need parts that are harder to source.
4. Call-Out And Diagnostic Fees
Most engineers charge £50–£80 to attend and diagnose the fault, and reputable firms deduct this from the final bill if the repair goes ahead. Always ask before booking.
5. Your Location
London and the South East run roughly 15–30% higher than the North of England, Wales and Scotland, reflecting higher labour and travel costs. A £130 repair elsewhere can be £170–£200 in the capital.
6. Timing And Urgency
A standard booked visit costs less than an emergency or same-day call-out, and evenings, weekends and bank holidays can add a surcharge.
What's Included — And What's Not
| Typically included in a repair quote | Usually charged separately |
|---|---|
| The engineer's labour to diagnose and repair the fault | Replacement parts, unless the quote is explicitly "parts and labour" |
| The call-out or diagnostic fee (often waived or discounted if the repair proceeds) | Premium genuine-brand components |
| Basic consumables such as connectors and seals | A second visit if a part has to be ordered in |
| A gas safety check on gas appliances after the repair | Removal and disposal of the old appliance if you replace instead |
| A short workmanship guarantee |
Always ask for a fixed, itemised quote that states whether the part is included, so the final bill matches what you were told.
Can You Do It Yourself?
A few electric repairs are within reach of a careful DIYer with the power isolated: swapping a control knob, or replacing an accessible oven element or hotplate ring where the part simply unplugs. These low-risk jobs can save a call-out.
Everything else is best left to a professional. Gas hobs and cookers must never be worked on by anyone who is not Gas Safe registered — a wrong connection risks a leak, fire or carbon monoxide, and it is illegal for unregistered people to carry out the work. Ceramic and induction repairs involve delicate glass and electronic boards that are easy to damage further, and any repair near mains electricity carries a shock risk if done wrong. A DIY attempt can also void a remaining warranty. When in doubt, book a diagnostic visit so a qualified engineer confirms the fault before you spend on parts.
How To Save Money On A Cooker Or Hob Repair
- Book a fixed-price repair rather than an open-ended hourly rate, so you know the total up front.
- Choose a firm that waives the call-out fee when the repair goes ahead.
- Describe the symptoms accurately when booking (which ring, error code, smell, noise) so the engineer arrives with the likely part.
- Do the simple checks first — confirm the power or gas is on and the clock/timer is not set to a delayed start before paying for a visit.
- Bundle appliances — if your washing machine or dishwasher also needs attention, a single visit spreads the call-out.
- Weigh up repair vs replace on older appliances before committing to a major part.
Schedule Fast, Reliable Appliance Repair Today
How To Hire A Good Appliance Engineer
Look for an engineer who is insured, gives a written, fixed quote, and offers a workmanship guarantee. For any gas appliance, confirm they are Gas Safe registered and ask to see the card — the register can be checked online. Read reviews, ask whether the diagnostic fee is deducted if the repair proceeds, and confirm whether genuine or universal parts will be used.
With Fantastic Services, you get vetted, insured appliance engineers, transparent pricing and online booking — describe the fault and get a price before anyone visits.
Frequently Asked Questions
How Much Does It Cost To Repair A Cooker Or Hob In The UK?
Most cooker and hob repairs cost £70–£250 inc VAT in 2026, rising to £100–£300 in London. The final price depends on the fault, the fuel type, the brand and your location.
How Much Does It Cost To Fix A Cracked Ceramic Hob?
Replacing a cracked ceramic or glass hob surface typically costs £150–£250+, since the glass top itself is £80–£200 plus labour. On an older hob, that can approach the price of a new one, so weigh up replacement.
Does A Gas Hob Repair Need A Gas Safe Engineer?
Yes. Any repair to a gas hob or cooker must be carried out by a Gas Safe registered engineer — it is a legal safety requirement. A general handyman or unregistered person must not work on gas appliances.
Is It Worth Repairing A Cooker Or Buying A New One?
If the repair costs more than half the price of a comparable new appliance, and the cooker is already 8–12 years old, replacing it is often better value. Cheap fixes on newer appliances are almost always worth doing.
How Much Is The Labour To Repair A Hob?
Labour is typically £50–£130, depending on how long the job takes, with the part added on top unless the quote is "parts and labour". A call-out or diagnostic fee of £50–£80 may apply, often waived if the repair proceeds.
What Are The Signs A Hob Or Cooker Needs Repairing?
Common signs include a ring or oven not heating, uneven cooking, a gas burner that will not light or keeps clicking, error codes on an induction hob, or a cracked glass surface. Any smell of gas means switching off and calling a Gas Safe engineer immediately.
Sources (market research, 2026): Housekeep, Checkatrade, MyBuilder, MyJobQuote and regional appliance-repair providers. All prices are indicative market ranges and should be verified against Fantastic Services' live pricing before publication.
