Hard Floor Cleaning in London

Restore the clean, fresh look of your floors with our professional hard floor cleaning service in London. Our advanced orbital cleaning system and specialist solutions remove deep-seated dirt, grease, and grime, bringing tired, dull floors back to life.

  • Professional hard floor cleaning designed to clean effectively without damaging delicate floor surfaces
  • Deep scrubbing, polishing and restoration treatments that bring dull or heavily trafficked floors back to life
  • Restores shine and removes dull, worn appearance
  • Experienced, trained and fully insured London technicians
  • Flexible bookings across London 7 days a week
  • Deep cleaning service suitable for a wide range of hard floor types
  • Zero drying time - your space is back in use straight after cleaning
Featured logos

Professional hard floor deep cleaning in London

Over time, everyday foot traffic, detergent residue and grease can build up on hard floors. This causes surfaces to become dull, sticky or discoloured. Our professional machine floor cleaning service removes these deposits safely and effectively.

Using dual-action floor scrubbing machine (ORBOT Vibe™) with UltraLIFT melamine pads and professional cleaning products, we can:

  • Remove grease build-up from kitchen floors
  • Restore dull or heavily trafficked floor tiles
  • Lift embedded dirt from grout lines
  • Remove detergent residue that causes sticky floors
  • Refresh the appearance of worn or tired-looking floors

This process is ideal for homeowners looking for a deep tile and grout cleaning service in London or for anyone wanting to restore the appearance of their flooring without replacing it.

Types of hard floor cleaning services we offer in London

We offer several professional treatments depending on the condition of the floor and the result you want to achieve.

Hard floor deep scrub

Recommended for very dirty floors or surfaces with heavy soil build-up. Using an advanced Orbot Vibe hard floor cleaning machine, we apply a cleaning solution that lifts dirt, grease and stains that normal mopping cannot remove. The floor is then rinsed and left clean and fresh. This service is ideal when:

Floors have heavy soil or grease build-up
Dirt has become embedded in the surface
Grout lines have darkened
Detergent residue has accumulated

No polish or seal is applied during this treatment, which means there is no drying time - your floor is ready to use immediately after cleaning.

Hard floor clean & shine

For floors that require both thorough cleaning and a noticeable improvement in appearance, this treatment provides an effective solution.

Over time, everyday foot traffic, dust, light grease and surface marks can cause hard floors to look dull, slightly worn or uneven in colour. Our process removes this build-up and refreshes the overall look of the flooring.

We begin by removing everyday dirt, light grime, scuff marks and surface residue using professional cleaning equipment and suitable floor-safe solutions.

Once the floor is properly cleaned, we restore its appearance by polishing or applying a protective seal, depending on the floor type and condition.

The result is a cleaner, brighter floor with improved clarity, enhanced shine and a more even finish. The added protective layer also helps the surface resist future wear, making the floor easier to maintain and keeping it looking fresher for longer.

Picture of recently polished wood floor.

Hard floor strip & re-polish

Best suited for floors where the existing polish or protective finish has worn away, become dull, or developed an uneven, patchy appearance due to regular foot traffic and gradual surface wear. Over time, multiple layers of old polish can also accumulate, trapping dirt and making the floor look cloudy or tired.

During this treatment, we fully remove the old polish or finish, stripping the surface back to the clean floor underneath. The exposed floor is then deep cleaned using professional equipment to eliminate embedded dirt, residue and any remaining build-up. Once the surface is properly prepared, we apply a fresh protective polish or floor finish, carefully restoring the floor’s appearance.

This process brings back a smooth, uniform shine and a cleaner, more refreshed look, while the new protective layer helps guard the floor against future wear, scuff marks and everyday traffic.

Our hard floor cleaning methods and when they are used

Different floors require different professional treatments. Depending on the level of dirt, wear and surface condition, our hard floor cleaners use the most appropriate cleaning method to restore the appearance of the flooring and improve its durability.

Scrubbing - for heavy soil, grease and embedded dirt

Professional floor scrubbing is recommended when hard floors have accumulated heavy dirt, grease or detergent residue that regular mopping cannot remove. Using advanced Orbot Vibe hard floor cleaning machine with UltraLIFT melamine pads and suitable cleaning solutions, we break down stubborn grime and lift embedded dirt from the surface and grout lines.

Deep cleaning - for dull, sticky or heavily trafficked floors

Professional deep floor cleaning is recommended when floors begin to look dull, sticky or discoloured due to everyday use and heavy foot traffic. Over time, layers of dirt, grease and cleaning product residue can build up on the floor surface, making it difficult to maintain its appearance through regular cleaning. This treatment removes ingrained dirt and helps restore the natural look and cleanliness of the floor.

Polishing or re-coating – when the protective finish has worn away

Many hard floors are protected by a polish or surface finish that improves appearance and helps protect the material from wear. Over time, this protective layer can become worn, dull or uneven due to regular use. When this happens, polishing or re-coating helps restore the floor’s shine and protective surface. Applying a new polish or protective finish helps create a smoother, brighter surface while protecting the floor from future wear and traffic.

Herringbone parquet flooring in elegant empty room with chandeliers.

How to book a hard floor cleaning appointment online

Arranging a professional hard floor cleaning service in London is quick and convenient with our online booking system. In just a few simple steps, you can schedule a trusted technician to deep clean and restore the shine of your floors at a time that suits you.

1. Check service availability

Enter your postcode to check availability for our hard floor cleaning service in London and see the earliest appointment times offered by local technicians.

2. Choose a suitable date and get your quote

Select the most convenient time slot for you. You will receive an estimated price based on the size of the area and the type of flooring that needs professional cleaning, such as tile, vinyl, stone, or sealed floors.

3. Meet the floor cleaning technician

On the day of the appointment, a trained technician will arrive with professional equipment to carry out the deep hard floor cleaning, grout cleaning, or floor polishing service.

4. Enjoy beautifully restored floors

The technician will complete the job using a specialised dual-action floor cleaning machine. Once the service is finished, your floors will look cleaner, brighter, and refreshed, helping restore their original appearance.

How much does hard floor cleaning cost in London?

Hard floor cleaning in London typically costs between £3 and £10 per square metre. The final cost depends on several factors, including the type of flooring material, condition and the overall size of the area that requires hard floor cleaning.

Service typePrice per m²With Seal or Polish
Slate£5£4
Limestone£5£4
Concrete (sealed)£4£4
Resin / Epoxy£5£4
Varnished Wood£4£2
Rubber£3£2
Terrazzo£3£2
Safety Flooring£3
Vinyl£8
Linoleum£8
Ceramic / Porcelain£3
Quarry Tiles£5
Minimum charge£120 per booking
*Prices are indicative and depend on floor condition, level of soiling, and total area to be cleaned.

Trusted hard floor cleaners - top rated experts in London

Thousands of customers across London trust our professional hard floor cleaners for their homes. Our service is consistently rated highly for reliability, quality of cleaning, and friendly technicians.

Specialist cleaning for different hard floor types

Our technicians are trained to clean and maintain a wide variety of residential hard floor surfaces, using the appropriate cleaning methods, equipment and products for each material. Whether your flooring is made from ceramic tiles, resilient vinyl, natural stone or sealed concrete, our professional hard floor cleaners can help restore its appearance and remove embedded dirt that normal mopping cannot eliminate.

✔ Ceramic and stone tiles

Over time, dirt, grease and detergent residue can build up on the surface and inside grout lines, making tiles look dull or discoloured. Our machine cleaning process removes this build-up and restores the original look of the floor. We clean and maintain:


Ceramic tiles commonly found in kitchens, hallways and bathrooms
Porcelain tiles, including dense and polished porcelain flooring
Quarry tiles, often used in utility areas and high-traffic spaces
Slate flooring, which requires careful cleaning to protect the natural stone surface
Limestone tiles, cleaned only with neutral stone-safe products to prevent surface damage
Terrazzo flooring - we provide maintenance cleaning and polishing treatments to improve the shine and maintain the protective finish
✔ Resilient floors

Resilient flooring materials such as vinyl and linoleum are designed for durability, but they can still accumulate soil, grease and scuff marks over time. Our professional deep cleaning process removes embedded dirt and refreshes the appearance of these floors without damaging the protective surface layer. We provide cleaning and maintenance for:


PVC and vinyl flooring
Thermoplastic tiles, commonly used in kitchens and utility rooms
Linoleum floors, which benefit from deep cleaning to remove ingrained dirt
Rubber flooring, typically installed in gyms, play areas or utility spaces
Safety flooring, where deep machine cleaning helps remove dirt trapped in the textured surface
✔ Other hard floor surfaces

Some modern homes also feature specialist floor finishes designed for durability and contemporary interiors. Our technicians can safely clean and maintain many of these sealed hard surfaces, including:


Resin and epoxy floors, often found in garages, basements or modern interiors
Sealed or painted concrete floors, which benefit from machine scrubbing to remove dirt and traffic marks
Varnished or sealed wooden floors, where we provide maintenance cleaning and light re-coating treatments to refresh the protective finish
A shiny wooden floor and two windows

Floors we do not clean

Some flooring materials require specialist restoration techniques, equipment or surface treatments that fall outside the scope of our standard hard floor cleaning service.

These surfaces often need dedicated stone restoration systems, diamond polishing, sanding machinery or specialist sealing processes that are carried out by restoration professionals.

For this reason, we do not provide cleaning or restoration for the following floor types:

Marble restoration, which typically requires professional stone grinding, honing and polishing systems

Granite restoration, involving specialist resurfacing and diamond polishing equipment

Travertine restoration, which may require filling, honing and stone refinishing treatments

Wood floor sanding, where the surface layer of timber must be sanded back and refinished

Sealing or finishing bare or untreated wood floors, which requires specialist timber finishing products and sanding preparation

Cork flooring, which requires dedicated cleaning and restoration techniques specific to cork materials

Hard floor cleaning methods and prices by floor type

Different flooring materials require different professional cleaning methods to achieve the best results without damaging the surface. The table below outlines the recommended hard floor cleaning process, available treatments and the standard price per square metre for each floor type.

Floor Type Machine Scrub Deep Clean Polish / Recoat Cleaning Method Price per m²
Safety Flooring Yes Yes No Slip-safe machine scrub, rinse and dry. No polish is applied to preserve anti-slip properties. £3
Vinyl / PVC Yes Yes Yes Strip old polish if needed, machine scrub, rinse, neutralise and apply fresh polish. £8
Linoleum Yes Yes Yes Machine scrub, neutralising rinse, dry, apply polish and burnish for a refreshed finish. £8
Rubber Flooring Yes Yes Optional Machine scrub, rinse and dry. Optional low-sheen finish where suitable. £3
Terrazzo Yes Yes Maintenance only Deep scrub, rinse and maintenance polish or burnishing where appropriate. £3
Ceramic / Porcelain Yes Yes No Machine scrubbing with special focus on grout lines. £3
Quarry Tiles Yes Yes Optional seal Heavy-duty scrub to remove grease and embedded soil. £5
Slate Yes Yes Optional seal Stone-safe scrub, rinse and dry, optional sealing. £5
Limestone Gentle only Yes No Gentle cleaning with neutral stone-safe products. £5
Sealed Concrete Yes Yes Optional Machine scrub, rinse and dry, optional maintenance coating. £4
Resin / Epoxy Yes Yes Yes Machine scrub, rinse and burnish to restore shine. £5
Varnished Wood No heavy scrubbing Yes Optional Low-moisture clean and gentle buffing. £4

Hard floor cleaning London - FAQs

What types of floors can be professionally cleaned?
Professional hard floor cleaning services can safely clean and restore many types of flooring commonly found in London homes, including ceramic, porcelain tiles, quarry tiles, slate, limestone tiles, terrazzo, PVC, vinyl, thermoplastic tiles, linoleum, rubber flooring, safety flooring, resin/epoxy floors, sealed or painted concrete floors, and varnished/sealed wooden floors. Professional technicians assess the floor material, level of soiling, and protective finish before selecting the correct cleaning method. This ensures deep cleaning without damaging delicate surfaces such as natural stone or sealed wood floors.
What is rotary machine floor cleaning?
Rotary machine floor cleaning is a professional cleaning method that uses a specialised rotating floor machine to scrub and deep clean hard flooring surfaces. The machine rotates a cleaning pad or brush at high speed while applying a cleaning solution designed for the specific floor type. This process allows technicians to break down stubborn dirt and grease, clean deep into grout lines, remove residues that mopping cannot reach and restore the appearance of the floor surface. Rotary machine cleaning is commonly used for tile floors, vinyl flooring, terrazzo, safety flooring, and sealed concrete surfaces. Because it provides a deeper and more even clean, it is one of the most effective professional methods for restoring heavily trafficked hard floors.
Can professional cleaning remove dirty grout lines?
Yes. Professional tile and grout cleaning can significantly improve the appearance of dirty or dark grout lines. Grout is porous and easily traps grease, dirt, bacteria, and cleaning residue over time. Standard mopping often spreads dirt rather than removing it, which is why grout lines gradually become darker. Professional cleaning uses rotary machine scrubbing and specialist cleaning solutions to break down embedded dirt and lift it from grout pores. While extremely effective, heavily stained or damaged grout may sometimes require grout recolouring or sealing for complete restoration.
How long does professional hard floor cleaning take?
Professional hard floor cleaning usually takes between 2 and 4 hours. The duration of cleaning depends on several factors, including the size of the area, the type of flooring, and the level of dirt or grease build-up. After cleaning, most floors dry quickly and are usually ready for light foot traffic within 30–60 minutes, depending on ventilation and the cleaning method used.
Can you restore dull or faded floors?
Yes. Floors that appear dull, faded, or uneven often have built-up dirt, grease residues, or worn protective coatings rather than permanent damage. Professional hard floor cleaning can restore the appearance of many floors using a combination of deep machine scrubbing, floor polishing and removal of worn protective finishes. These treatments help remove embedded dirt and restore the natural shine of the floor surface. Floors in high-traffic areas such as kitchens, hallways, and entrances often benefit the most from professional restoration because everyday cleaning cannot remove deeply embedded grime.
How often should hard floors be professionally cleaned?
Most homes benefit from professional hard floor cleaning every 12 to 18 months, depending on the type of flooring and the amount of foot traffic. Certain areas may require more frequent cleaning, especially kitchen floors exposed to grease and spills, hallways and entrances with heavy daily traffic, homes with pets or children. Regular professional cleaning helps maintain the appearance, hygiene, and lifespan of the flooring, while preventing dirt build-up that can wear down protective finishes.
Is professional tile and grout cleaning worth it?
Yes. Professional tile and grout cleaning is often far more effective than standard household cleaning methods. Over time, grout lines absorb dirt, grease, and bacteria, which makes tile floors look dark and worn even after regular mopping. Professional cleaning provides several benefits, including deep removal of dirt and grease, restoration of grout colour and floor appearance, improved hygiene, and extending the lifespan of flooring materials. For heavily trafficked areas like kitchens and hallways, professional tile and grout cleaning can significantly improve the overall look of the floor and make routine maintenance much easier.

Can't find the answer you're looking for?
Visit our Help Center.

Bring your dull floors back to life. Schedule your London hard floor cleaning service today.

Domestic clients 020 3404 3444
Business clients 020 3746 1062

Skip the line, request and
book a service online

Book a service