Drilling a hole in a wall in SE10 is not always a small decision. A great deal of the housing here is old brick laid in lime mortar, some of it in frontages that define a protected streetscape, and a repair made with the wrong material leaves a mark that is visible for the rest of the building's life.
Lime and cement do not get on
Historic brickwork was built with a soft lime mortar that is deliberately weaker than the brick around it. The joint takes the movement, and when it weathers, the joint is what erodes rather than the brick face. Pointing that wall with a hard cement mortar reverses the relationship: the joint becomes stronger than the brick, moisture is forced to leave through the face instead, and the arris of every brick begins to spall. The damage is slow, permanent and extremely common on houses that have had a well-meaning patch repair.
Filling a hole so it disappears
Old fixings leave a legacy of holes in a frontage: brackets long gone, a satellite dish, an alarm box, the ghost of a downpipe moved thirty years ago. Filling them well is largely about depth and about where the filling material sits. A hole in a mortar joint is raked back to sound material, dampened, and filled in layers with a matching mortar, finished slightly back from the face and textured rather than smoothed flat. A hole in the face of a brick is the harder case and is best filled with a repair mortar tinted to the brick rather than to the joint, because a pale disc on a dark brick reads worse than the hole did. Holes left by an old alarm box or light often still have a live supply behind them, and disconnecting it is work for our Eltham team.
Raking out without widening the joint
The tool matters as much as the mortar. Running an angle grinder along a joint in soft brickwork almost always cuts into the brick above and below, leaving a joint permanently too wide and a row of saw marks that no amount of careful pointing hides. Hand tools are slower and correct. The joint is cut back to roughly twice its height, the dust is brushed out, and the surface is dampened so the new material does not lose its water into the brick before it has cured.
Where consent comes into it
Parts of this district sit within conservation areas, and a significant number of individual buildings are listed. Repointing, replacing a downpipe or altering anything visible on the exterior of a listed building can require consent, and conservation area status brings its own controls over the appearance of a frontage. The safe sequence is to establish a property's status with the council before work rather than after, and a genuine like-for-like repair in matching materials is a very different proposition from a change of material or appearance. Non-invasive alternatives, such as a fitting carried on an existing opening or a reversible fixing into a joint rather than a brick face, are worth exhausting first. Protected frontages of the same kind shape a good deal of the work covered by our nearby specialists.
Weather on an exposed elevation
Riverside and hilltop elevations here take driving rain, and a wall that is saturated repeatedly will find any defect. Failed pointing at a high level, a cracked cill, or an open joint behind a downpipe will deliver water to the inside face of a wall long before anyone connects the two. Internally the result is a damp patch that moves with the weather, and the internal surface is treated under our mould removal in Greenwich while the external cause is a separate repair.
Working at the front of a protected house
Practicalities matter on these streets. Many houses have no rear access, footways are narrow, and scaffolding or even a tower needs a licence from the highway authority. Ladders resting against soft brick or on delicate railings need spreading and protection. Front gardens and lightwells often sit over vaults, so nothing heavy is stood without knowing what is underneath. Open vaults and lightwells beneath a front garden are sheltered, undisturbed spaces, and anything found living in one is a matter for pest control for flats in Greenwich rather than a masonry repair.
Arranging a masonry repair
Small external repairs are weather-dependent, because lime-based materials will not cure in frost and wash out in heavy rain. Photographs of the affected area, a note of the property's conservation or listed status, and a sample of loose mortar if any is available all speed up preparation. Time on site and the access required set the cost. The wider list of tasks is on our main service page.