Commercial Mould Removal for AJ Brett and Co Ltd’s Antique Furniture Workshop

Mould doesn’t just damage walls – left untreated, it can put staff health at risk and threaten the valuable stock businesses depend on. This case study outlines how Fantastic Commercial Services helped antique furniture manufacturer AJ Brett & Co Ltd tackle a long-standing, hard-to-reach mould problem across their workshop.

AJ Brett & Co Ltd, a well-established antique furniture manufacturer, had been dealing with a persistent mould problem in its workshop for several years. Despite a mould treatment carried out the previous year, the contamination returned, indicating that the underlying cause had not been fully resolved.

The mould was concentrated on a first-floor wall that was not completely waterproof. It had spread across two separate areas on the first floor and extended towards the ground floor and basement. Over time, this resulted in heavy, deep-rooted contamination on the first-floor concrete walls, including a particularly difficult section directly above the staircase.

The situation became increasingly urgent when several employees began experiencing mould-related sensitivities. This highlighted that commercial mould growth is not only a property maintenance issue, but also a workplace health and safety concern that requires prompt and professional attention.

Given the scale and complexity of the property, with mould affecting both the ground and first floor, and hard-to-reach areas above the staircase, our team proposed a thorough, full-day mould remediation plan.

Following the site survey, we prepared a detailed mould remediation plan covering the first-floor and ground-floor affected areas.

1. HEPA Air Filtration and Air Scrubbing

Our technicians installed professional HEPA air filtration units before physical mould removal began. These units captured airborne mould spores and fine particles released during treatment, effectively containing them and preventing cross-contamination of unaffected areas of the workshop.

2. Mould Neutralisation

A professional-grade disinfectant was applied to neutralise mould spores and microorganisms at a microscopic level, treating contamination that goes beyond what’s visible to the eye.

3. H-Class HEPA Vacuuming and Safe Mould Removal

After treatment, mould residues were removed using an H-Class wet and dry vacuum, certified for hazardous dust and biological contaminants. This equipment is specifically designed to contain high-risk particles, ensuring that loosened mould spores are safely captured rather than redistributed throughout the workshop.

4. Post-Treatment Air Filtration

HEPA air filtration continued throughout and after the treatment to improve indoor air quality and clear any remaining airborne particles from the workshop.

Our site assessment confirmed heavy mould contamination across the hallway and office areas, primarily caused by a leak combined with poor ventilation. Following treatment, we provided AJ Brett & Co Ltd with a clear set of recommendations to prevent recurrence:

As with any mould remediation project, we were clear with the client that while our treatment fully removes and neutralises existing contamination, mould growth is directly linked to moisture. Addressing the underlying leak and ventilation issues is essential to keeping the workshop mould-free going forward.

Following our full-day commercial mould remediation, the contamination across the workshop’s ground and first floor was successfully treated and removed. The HEPA filtration process left the air quality significantly improved, and the affected concrete walls, including the previously untreatable area above the stairs, were properly decontaminated for the first time in years.

Our team also cleaned the working areas thoroughly after completing the treatment, ensuring that the workshop was left clean, tidy and ready to be used again.

For a business built on the craftsmanship of antique furniture, a clean, mould-free workshop isn’t just about compliance – it’s about protecting both the team and the valuable stock within it.

“I am very pleased with the mould remediation work carried out by this company. The team was professional, reliable, and arrived on time as promised. They took health and safety seriously, explained everything clearly, and were always helpful and pleasant to deal with throughout the process.

The workers were respectful, worked efficiently, and made sure everything was kept clean and tidy. They took the time to clean up properly once the job was finished, leaving the area spotless.

The quality of the work was excellent, and it was clear that they take pride in what they do. I would highly recommend this company to anyone needing mould treatment or remediation services.”

— Alan Nugent, AJ Brett & Co Ltd

Mould in a commercial property can affect more than just the building – it can impact staff wellbeing, stock, and day-to-day operations. If you’re dealing with recurring mould, damp walls, or hard-to-reach contamination like the AJ Brett & Co Ltd team were, our commercial mould removal specialists can help.